Rockwell RK2860K2 Use and Care Manual download pdf (Page 12)

HIGH EFFICIENCY IMPACT DRIVER ENG

TROUBLE SHOOTING

1. I CAN NOT FIT THE BATTERY INTO THE BATTERY

CHARGER. WHY?

The battery can be inserted into the charger only in one

direction. Turn the battery around until it can be inserted

into the slot, the red LED Light should turn on when the

battery is charging.

2. REASONS FOR DIFFERENT BATTERY PACK

WORKING TIMES

Charging time problems, as above, and having not used a

Battery Pack for a prolonged time will reduce the Battery

Pack working time. This can be corrected after several

charge and discharge operations by charging & working

with your drill. Heavy working conditions such as large

screws into hard wood will use up the Battery Pack

energy faster than lighter working conditions. Do not

re-charge your Battery Pack below 0

C and above 30

as this will affect performance.

MAINTENANCE

Your power tool requires no additional lubrication or

maintenance.

There are no user serviceable parts in your power tool.

Never use water or chemical cleaners to clean your

power tool. Wipe clean with a dry cloth. Always store your

power tool in a dry place. Keep the motor ventilation slots

clean. Keep all working controls free of dust. Occasionally

you may see sparks through the ventilation slots. This is

normal and will not damage your power tool.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

No comments

Rockwell RK2860K2 Use and Care Manual Page 12